AcquaVapore S15D-WP-TH-L-ALL: walk-in bathtub with door, whirlpool and glass shower screen for the left room corner
With the AcquaVapore S15D-WP-TH-L-ALL, Seniorbad.de offers a solution for people who miss relaxed lying in the bathtub, without having to give up a safe entry. The combination of walk-in bathtub with side door, five water massage jets and a folding glass shower screen makes this model both a full bath and a complete shower unit in one enclosure. The external dimensions 160 x 85 cm with an overall height of 215 cm are designed for a room corner, and the left-hand version means: the long wall side is on the left, and the entry opens towards the free room side.
This model is particularly useful as an investment in the age-appropriate owner-occupied flat, where the bathroom should stay safe and usable in the long term, without rebuilding the entire floor plan. It is equally suitable for flats with no room for a separate tub step solution, as shower and tub are combined in a single installation location. You gain not only comfort but also valuable floor space back in the bathroom. In our range of senior bath tubs you will find further low-threshold models.
How the S15D-WP-TH-L-ALL combines massage and safe entry
The side door opens to its full width and gives an entry of 38 cm. This entry width makes getting in considerably easier, because you do not have to climb over a high tub rim but enter through a wide, low door opening. A safety latch locks the door watertight before you fill the tub, and it stays locked until you stand up again after the bath and open the mechanism from the inside. The door seal is designed so that no water escapes as long as the latch is closed.
Inside the 160 x 85 cm tub you lie in a tub geometry typical of walk-in bathtubs. The usable immersion depth is 33 cm, which is enough for a relaxed lying bath. Five water massage jets are recessed into the tub wall and work on the whirlpool water system, which circulates treated bath water and directs it in a targeted way onto back, legs and sides. The fill content is 120 litres up to the overflow and a maximum of 146 to 155 litres when the container is full. The thermostatic mixer in polished brass with a chrome-plated surface lets you set the water temperature precisely before you get in, and keeps it stable during the bath. Thanks to the folding glass shower screen in 6 mm toughened safety glass, you can also use the same tub as a shower place at any time, by raising the screen and using the hand shower. This way you decide according to the situation whether you take a lying bath or run the unit as a shower.
A height-adjustable stainless steel frame provides the secure footing, and the tub body itself is made of fibreglass-reinforced acrylic. This material combines low weight with good dimensional stability and is easy to care for in the long term.
Technical data
The most important key data of the AcquaVapore S15D-WP-TH-L-ALL at a glance:
-
External dimensions of tub body: 160 x 85 cm, overall height 215 cm (incl. shower screen)
-
Version: left-hand version, for the left room corner (long wall side on the left)
-
Entry width: 38 cm (clear door opening)
-
Immersion depth: 33 cm (up to the overflow)
-
Fill volume: approx. 120 litres, maximum 146 to 155 litres
-
Whirlpool jets: 5 water massage jets (water system)
-
Mixer: thermostatic mixer, brass/chrome polished, with diverter
-
Shower screen: glass shower screen, folding, 6 mm toughened safety glass, hinged on the left
-
Tub body material: fibreglass-reinforced acrylic
-
Frame: stainless steel, height-adjustable feet
-
Voltage: 230 volts (for the whirlpool pump)
-
Colour: white
In the bathroom a hot water, a cold water and a 40 millimetre waste water connection should be available. As this model has a whirlpool function, you additionally need a 230 volt power connection near the tub that complies with the relevant wet room regulations. If you are unsure whether the connection layout fits, please get in touch with our team before ordering. With a passage width of 70 centimetres, the tub comes through any common standard door and can be brought into the bathroom without dismantling.
In the warehouse a final inspection of each tub is carried out with a water filling. As soon as watertightness is confirmed, the tub goes back into the shipping carton. Delivery is by carrier, kerbside delivery, and the driver contacts you in advance by phone to arrange the date. The set consists of two parts that you bring together on site: tub body and glass shower screen. The enclosed assembly instructions guide you step by step through the assembly, which can usually be carried out without special tools.
