AcquaVapore S08WP-TH-A-R: sitting bathtub with door, whirlpool and thermostatic mixer
The AcquaVapore S08WP-TH-A-R combines deep seated comfort with a 66 cm immersion depth and an 8-jet water massage system that can relax you effectively after a long day. The sitting bathtub with a side entry measures 110 x 68 x 114 cm and offers an entry width of 49 cm at the door, so you can step in and out comfortably. The model suits people who rely on mobility-friendly access when getting into a conventional bathtub, or who simply prefer it.
You can plan the AcquaVapore S08WP-TH-A-R into a forward-looking bathroom layout for later life, or use it as an investment in an age-appropriate flat. Anyone who adapts the bathroom today acts calmly rather than in an emergency, and gains comfort and safety over the long term.
Jets, door system and water routing
The side door opens in installation variant A (left corner) with the door hinged on the right and gives you a generously sized entry of 49 cm. The low door threshold makes stepping in safer, and the integrated grab handle provides additional support as you get in. The door closes with a triple locking mechanism and a safety latch that reliably stays watertight. A door drainage in the lower area prevents residual water from running onto the floor when you open the door after bathing.
The interior offers an anatomically shaped seat at a seat height of about 38 cm; the seat surface measures roughly 40 x 50 cm (width x depth). The water massage system works with 8 jets at 750 W and 230 V: two jets sit in the wall area, and six fixed back jets spread the massage flow broadly across the back area. The extra deep construction achieves an immersion depth of 66 cm, so the water reaches up to the stomach when seated and up to the chest for smaller people. An integrated neck rest keeps the head in a relaxed position. The thermostatic mixer with diverter is made of brass and polished chrome-plated, and it keeps the desired water temperature stable. The bathtub, made of fibreglass-reinforced acrylic, stands on a height-adjustable stainless steel frame whose feet can be adjusted in height during assembly. The water capacity is 95 to 105 litres, which is realistic and economical for a sitting bathtub of this depth. In our selection of senior bathtubs you will find further low-threshold models for safe bathing in later life.
Technical data
The key specifications of the AcquaVapore S08WP-TH-A-R at a glance:
- External dimensions: 110 x 68 x 114 cm (length x width x height)
- Installation variant: A (left corner), door hinged on the right
- Entry width (clear door opening): 49 cm
- Immersion depth (up to overflow): 66 cm
- Water capacity: 95 to 105 litres
- Seat height inside: approx. 38 cm, seat surface approx. 40 x 50 cm (width x depth)
- Whirlpool system: 8 water jets (2 wall jets, 6 fixed back jets), 750 W, 230 V
- Mixer: thermostatic mixer with diverter, brass body, polished chrome-plated
- Door: triple locking, safety latch, door drainage, door hinged on the right
- Bathtub body: fibreglass-reinforced acrylic, colour white
- Frame: stainless steel frame with height-adjustable feet
- Scope of delivery: bathtub, shower mixer, shower hose, shower head
Three connections are required for installation: hot water and cold water, each at 1/2 inch, and a waste water outlet with an HT-40 diameter. Please measure the installation location once before the delivery arrives. As this model has an electric whirlpool system, you additionally need a 230 V power connection near the bathtub; the installation must comply with the applicable regulations for wet rooms. If you have questions about planning the installation location, we at Seniorbad.de are happy to help. The bathtub fits through a standard door from 70 cm wide as a whole, so transport into existing bathrooms is possible in most cases without dismantling.
We test every model in the warehouse with water before it is dispatched. The bathtub is then packed up safely again so that it reaches you undamaged. The scope of delivery includes the bathtub, shower mixer, shower hose and shower head; everything else needed for the water connection must be provided by you on site. For delivery by carrier we ask for a daytime telephone number so the carrier can contact you in advance to arrange the delivery date. Delivery is kerbside delivery.
