AcquaVapore K50-L02-WP-ALL: whirlpool bathtub with shower cabin, left room corner, 170 x 100 cm
The AcquaVapore K50-L02-WP-ALL brings a space-saving combination solution of whirlpool tub and shower top into your bathroom, without needing several individual appliances for it. The system is designed as a left-hand version and fits into the left room corner, where the long wall side is on the left. The integrated whirlpool tub is driven by a 750 watt water pump and offers a targeted water massage through 5 tub massage jets. In the panel of the glass top there are additionally 6 back massage jets installed, which massage the back with a water jet while showering. The thermostatic mixer made of chrome-plated brass regulates the water temperature precisely and is mounted directly on the panel.
The K50-L02-WP-ALL can be used both as a long-term upgrade of your own property and for upgrading the bathroom during a modernisation, when the bathroom is to be equipped with a full wellness system without elaborate conversion. As an overall solution the system replaces bathtub, massage system and shower in one, which makes sensible use of the available space especially in medium-sized bathrooms. We present further space-saving shower bath combinations in our range.
Water massage and shower in daily use
The whirlpool tub made of fibreglass-reinforced acrylic offers sufficient room for relaxed lying with an immersion depth of 34 cm and around 180 litres capacity. The water system with 750 W drives 5 tub massage jets, including 3 adjustable and 2 fixed, which enable a beneficial water massage during the lying bath. Above sits the shower area with the thermostatic mixer, a large rain shower and a hand shower with three spray types. The 6 back massage jets in the panel of the glass top complement the experience while showering and are aligned to the upper and lower back. The waterfall for filling the tub is also integrated into the panel and allows comfortable filling without a separate fitting.
Installed is a frame made of galvanised steel whose height adjustment is done via threaded feet. This simplifies the alignment during the first assembly. The tub body itself is made of acrylic with fibreglass reinforcement, the glass top of 5 mm thick single-pane safety glass in a framed aluminium frame. The model K50-L02-WP-ALL is the father variant (ALL) and contains all selectable options of the product line, including depending on the version the glass coating. The total height of the assembled system is 225 cm, the external dimensions 170 x 98 cm. The fitting made of chrome-plated brass with ceramic cartridge is mounted directly on the panel in a practical way and thus within easy reach. The system comes in 4 individual components and is assembled at the installation site in the room corner.
Technical data
The most important equipment features and dimensions of the AcquaVapore K50-L02-WP-ALL at a glance:
- External dimensions: 170 x 98 cm, total height: 225 cm
- Whirlpool water pump: 750 watts (water system, no air system)
- Tub massage jets: 5, back massage jets in the panel: 6, total: 11
- Capacity: approx. 180 litres, immersion depth: 34 cm
- Fitting: thermostatic mixer, brass chrome-plated, mounted on the panel
- Glass top: 5 mm ESG, transparent, framed aluminium frame, hinge on the left
- Version: left room corner (long wall side on the left), corner installation
- Voltage: 230 volts / 50 Hz
- Water connection: 1/2 inch, 2 to 4 bar, cold and hot
- Waste water connection: HT 40 mm, integrated siphon with odour trap
- Scope of delivery: bathtub, shower fitting, shower head, shower hose
- Installation: corner installation, 4 individual parts, on-site assembly required
The required connections are a hot water connection, a cold water connection and a waste water connection with 40 millimetres. A preliminary check of the existing pipes considerably eases the later assembly. In addition, a 230 volt power connection is required for the whirlpool pump. Please note that thermostatic mixers are not suitable for connection to very old instantaneous water heaters or heavily limescale-rich water.
The model is delivered in individual parts that are put together in the bathroom. This way it also reaches rooms with narrow access. A water filling in the warehouse is part of our standard check before shipping. This way we ensure that only leak-tight and functional tubs leave the warehouse. Delivery is by carrier, kerbside delivery, the carrier contacts you in advance by phone to arrange the date.
