With the AcquaVapore F23-180, Seniorbad.de offers a freestanding air and water whirlpool bath for free-standing placement in the bathroom. The oval bath in the size 180 x 90 cm is delivered closed on all sides and can be positioned freely in the room, exactly as you plan it in your bathroom. The bath body is made of fibreglass-reinforced acrylic from the AcquaVapore brand, the water depth is 40 cm and the capacity is 140 litres. The bath is designed for one person and combines comfortable bathing in a pleasant reclining position with recovery after sport with targeted massage.
The combined air and water massage system of the F23-180
The AcquaVapore F23-180 has a complete air and water system: 8 air jets create an even, full-surface bubbling massage across the bath wall, while 12 water jets direct a targeted jet of water at the muscle areas. In total, 20 jets are fitted. The two systems are driven separately: the air pump delivers 300 watts, the water pump 500 watts. Both systems can be used independently of each other or combined. The equipment is complemented by a colour light therapy spot with 8 colours. The bath is supplied without a tap; the matching floor-standing tap can be chosen separately as variant AF02 to AF05. You will find comparable freestanding baths in the range.
-
Model: AcquaVapore F23-180, air and water whirlpool, freestanding
-
Dimensions: 180 x 90 cm, height 72 cm, oval basic shape
-
Water depth: 40 cm, capacity 140 litres, for 1 person
-
Bath body: fibreglass-reinforced acrylic, AcquaVapore brand
-
Frame: galvanised steel frame with height-adjustable feet
-
Air jets: 8 pieces
-
Water jets: 12 pieces (20 jets in total)
-
Air pump: 300 watts
-
Water pump: 500 watts
-
Colour light: therapy spot with 8 colours
-
Tap: without tap; floor-standing tap available separately (AF02-AF05)
-
Whirl system: air and water system
Massage functions, shape and comfort
The combined whirl system of the F23-180 offers two different massage profiles: the air system acts over a wide area and is relaxing, while the water system applies targeted pressure points at the jet positions. The combination of both systems makes the bath a versatile bathing and massage device. A frame made of steel is fitted, and its height is adjusted via threaded feet. This makes alignment easier during the initial installation. The connections required are a hot water connection, a cold water connection and a waste water connection of 40 millimetres. Checking the existing pipework in advance makes the later installation considerably easier. For operation, a 230-volt socket is needed as a household connection, which supplies the massage pump. The colour light control inside works with safe 12-volt safety extra-low voltage. Delivered as one package with built-in whirlpool technology, the bath is ready for use once water and electricity are connected. Before a whirlpool bath leaves our warehouse, we check the pump operation, jet pattern and watertightness in a test run. Delivery is by freight carrier, kerbside delivery, and the freight carrier calls you in advance by telephone to arrange an appointment.
Product safety information
Manufacturer information:
SeniorBad GmbH
Grenzstr. 11a
Sachsen
Laußnitz, Deutschland, 01936
info@seniorbad.de
https://www.seniorbad.de
