The freestanding AcquaVapore F01-170 combines a bathroom with a clear, modern design language as a focal point with a generous bathing experience and plenty of water volume. With its outer dimensions of 170 x 80 cm and its oval basic shape, this bath makes a clear design statement in the bathroom: placed free in the room, visible from all sides and installed without being fixed to a wall. It is equally suited to a bathroom renovation, where the bath is to become the central statement, and to a new build in which the floor plan allows free positioning.
Design and features of the AcquaVapore F01-170
The bath body of the AcquaVapore F01-170 is made of fibreglass-reinforced acrylic. The material combines pleasant heat retention with a smooth, easy-care surface that can be cleaned with standard bathroom cleaners. The oval basic shape follows the contour of the body and supports a relaxed reclining position without hard edges in the back or shoulder area. With a water depth of 42 cm and a capacity of around 120 litres, the F01-170 offers a deep, full bath for one person. The bathtub is designed for freestanding installation: all four outer sides of the bath body are fully finished and trimmed, so it presents a clean look from the side and from behind as well. The floor-standing tap with single-lever mixer belongs to tap variant AF02, which is included in the set and was designed specifically for freestanding baths. The tap is connected at the floor, beside or behind the bath, and has no connection to the wall. Waste and overflow are included in the scope of delivery and prepared at the factory. The chrome finish of the tap and the drain sets a deliberate accent against the matt or glossy bath body.
-
Model: AcquaVapore F01-170
-
Basic shape: oval
-
Outer dimensions: 170 x 80 cm, height 58 cm
-
Water depth: 42 cm
-
Capacity: approx. 120 litres
-
Bath body: fibreglass-reinforced acrylic, AcquaVapore brand
-
Installation: freestanding, closed on all sides, can be placed free in the room
-
Frame: galvanised steel frame with height-adjustable feet
-
Tap: floor-standing tap with single-lever mixer, variant AF02, included in the scope of delivery
-
Waste and overflow: included in the scope of delivery
-
Capacity: 1 person
Shape, dimensions and installation of the F01-170
The freestanding installation makes the AcquaVapore F01-170 an independent design element in the bathroom. It needs no wall connection at the side or rear and can be positioned in the room, provided the water supply lines and the waste water connection are laid accordingly. If you plan the bath as the centrepiece of the bathroom, it is best to install it so that at least three sides remain freely visible. The bath body rests on a height-adjustable steel frame, so small floor unevenness can be compensated for during set-up. Before ordering, it is worth taking a short look at the connections and the installation location. A hot and cold water connection and a waste water connection with a diameter of 40 mm are required. The bath is delivered as one package; at the installation location, only the water and waste water connections need to be made. A plumber or bathroom fitter can usually complete the installation within a few hours. Before the bath leaves our warehouse, we check the surface, drain and overflow for leaks. When ordering, please leave a telephone number where you can be reached during the day, so that the freight carrier can agree the delivery date with you. Delivery is kerbside.
Product safety information
Manufacturer information:
SeniorBad GmbH
Grenzstr. 11a
Sachsen
Laußnitz, Deutschland, 01936
info@seniorbad.de
https://www.seniorbad.de
There are no reviews yet.
